If you are looking for the answer to the question – “How to clean Microsuede Chair” then you have come to the right place.
Microsuede is one of the most preferred synthetic fabrics used as seat covers. Chairs made from this microfiber are durable, stain-resistant, comfortable, breathable, waterproof, and classy in appearance.
However, there is a catch. The fabric is not entirely resilient to soiling. Unmanaged dust, grime, spills, mildew, food crumbs, and pet sheds can leave your chair with unsightly stains or disagreeable odors.
Luckily, cleaning stains or grime on your microsuede chair is an easy task as long as you have the correct procedure. If this is the first time you are planning to deal with stains on microsuede, the following tips will help you keep your chair spotless clean.
Also Read: How to Clean Gaming Chair
How to Clean Microsuede Chair
1. Remove and Wash Cushion Covers
A fair amount of food crumbs, mold spores, and pet shedding will always land on your chairs’ cushions or pillows. This is the reason why cushion covers should be the first point of focus when looking to clean your microsuede chair.
Unzip the covers and pull out the cushion. Set your machine washer into the gentle cycle mode, set water temperature to warm, and add a microsuede-friendly detergent into the washing machine. Afterward, throw your covers into the washing machine, and turn it on to clean the covers.
A gentle cycle is recommended to protect the cover and zippers from the wear and tear associated with vigorous spinning. After cleaning, air-dry the covers instead of using the conventional fabric dryer. This is because the heat from a dryer can shrink your chair’s microsuede covers.
2. Vacuum the Chair to Eliminate Loose Debris
After successfully cleaning cushion covers, vacuum your chair to eliminate loose debris like dust, food crumbs, mold spores, and pet shading. Start vacuuming the unobstructed surfaces like the seat, armrest, and back support, then proceed to corners and edges.
Use the crevice tool to clean tight corners and the upholstery tool to clean unobstructed surfaces. Make sure you regulate your vacuum cleaner’s suction power to shield your chair from the wear and tear occasioning from powerful suctioning.
3. Secure the Right Cleaning Solution
When it comes to cleaning microsuede, experts classify this synthetic microfiber into four codes—W, S, X, and S-W. Each code is cleaned differently.
The microsuede coded W should be cleaned with a water-based solution, while that coded as ‘S’ should be cleaned with a solvent-based cleaner.
The microsuede coded X should be vacuumed, while that coded as S-W can be cleaned with solvent or water-based cleaning solution.
Many chairs have a labeled tag indicating the code of microsuede used on your chair.
You can also find the code in the chair’s care instructions, just in case you cannot spot it anywhere on the chair.
Regardless of the code on your microsuede chair, avoid chlorine-based cleaning solutions, bleaches, and carpet cleaners. These cleaning solutions would bleach, form unsightly water rings, or discolor your chair.
4. Identify and Spray the Spots that need Cleaning
With the suitable detergent at hand, get a clean spray bottle, and fill it with the solution. Professionals recommend a spray bottle because it applies the cleaning product directly to the stained area. The bottle will also minimize the chances of discharging excess detergent to the stained spot.
Though your chair might have several stained spots, deal with each one at a time. Supposing you want to clean the entire chair, handle an area of 3 square feet before moving to the next spot. That way, you will not leave out some spots when cleaning the chair.
5. Clean stained Areas with a Towel
Spray enough cleaning solution on the stained area, but make sure you do not drench it up. Using a clean towel, apply firm pressure while scrubbing the area in a circular motion to dislodge grime and stains. Use a different piece of towel to soak up the excess cleaning solution.
For stubborn stains, soak a clean towel in alcohol and then rub the piece of towel in a circular motion to dislodge the stubborn stains. In this case, alcohol will act as a degreaser. It will dislodge the oily and greasy stains that regular detergents cannot remove.
6. Dry the Cleaned Microsuede Chair
After eliminating those unsightly stains, let your microsuede chair dry thoroughly before use. You do not have to take it out or use anything to dry it up. It will take around 30 minutes to dry at room temperatures.
However, if you drenched it up in the cleaning solution, it would matter to expedite the drying process using a blow dryer set to the lowest heating function. Avoid higher temperatures since it might shrink or burn your chair’s microsuede cover.
Alternatively, you can speed up the drying process by setting a running fan near the wet microsuede chair. The fan’s airflow will whisk away excessive moisture on your chair, thereby accelerating the drying process.
After drying the microsuede, rub the cleaned area with a dry towel or a soft-bristled brush in circles till it regains its fluffy feel.
Tips to Care for your Clean Microsuede Chair
While cleaning a microsuede chair is a great way to remove stains and grime, intense scrubbing and regular exposure to cleaning solutions can reduce your chair’s lifespan. For that reason, it would matter to cut down the number of times you clean the chair. If you are wondering how you would achieve that, here are tips to help you.
Wipe Spills Immediately
Coffee, soda, water, or juice spills will take a long time to soak into microsuede. Therefore, if you do not want to deal with unsightly stains in the future, clear the mess immediately before it soaks up. Rub it lightly with a dry cloth, and let the spot dry. If the spill is large, cover it with baking soda, let it dry up, and then vacuum the spot.
Do a Spot Check before Using any Cleaning Solution
Not all cleaning solutions are friendly to microsuede. Some, like those containing chlorine, will discolor or bleach the microfiber. Therefore, before using any cleaning solution, run a spot test to ascertain that it will not ruin the fabric. You can do a spot check by applying the cleaning solution to a hidden section of your chair. Then, watch and see if it discolors or bleaches the microfiber.
Vacuum your Microsuede Chair Regularly
Instead of cleaning your chair with a detergent, experts recommend vacuuming your chair once a week to suck up dust, food crumbs, pet sheds, and other loose debris. Use the crevice attachment tool to clear debris lodged in the chair’s corners and edges, and the upholstery tool to clean cushions, armrests, back support, and other unobstructed surfaces.
Cover your microsuede chair
Covering your chair is a great way to shield it from dirt. Dust, spills, pet shedding, food crumbs, and other dirt will land on the removable cover instead of landing on your microsuede chair. When soiled, you can machine-wash or hand-wash the cover, which is easier than cleaning a stained microsuede chair. Covers are readily available in stores.
Conclusion
Hope we were able to provide the right solution to the question – how to clean microsuede chair.
It is quite simple.
Remove and machine wash the chair’s stained cushions.
Then, attach the upholstery or crevice tool to a vacuum cleaner, and suck up dust, mold spores, pet shedding, and food crumbs on the chair’s surface, corners, and edges.
Using a spray bottle, apply a proper cleaning solution to the stained area, and use a clean piece of towel to dislodge stains.
Let the chair dry and use a soft-bristled brush to restore its fluffy feel.
Recommended Read:
- How to Fix an Office Chair that leans Forward?
- What Gaming Chair does Dream use
- Are Seat Cushions Allowed On Airplanes?